API Spec 14L-2020 pdf free download

API Spec 14L-2020 pdf free download.Lock Mandrels and Landing Nipples.
1 Scope This specification provides the requirements for lock mandrels and landing nipples within the production/injection conduit for the installation of flow control or other equipment used in the petroleum and natural gas industries. It includes the interface connections to the flow control device or other equipment, but does not cover flow control devices, the connections to the well conduit, alternate technologies, or other requirements covered by other existing API or ISO specifications 2 Normative References The following referenced documents are indispensable for the application of this document. The way in which these referenced documents are cited determines the extent (in whole or part) to which they apply. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. API Specification 5B, Specification for Threading, Gauging, and Thread Inspection of Casing, Tubing, and Line Pipe Threads API Technical Report 5C3, Calculating Performance Properties of Pipe Used as Casing or Tubing, Seventh Edition API Specification 6A, Specification for Wellhead and Tree Equipment API Specification 1 4A, Specification for Subsurface Safety Valves API Specification 20A, Carbon Steel, Alloy Steel, Stainless Steel, and Nickel Base Alloy Castings for Use in the Petroleum and Natural Gas Industry API 579-1/ASME FFS-1, Fitness-For-Service API Specification Q1 , Specification for Quality Management System Requirements for Manufacturing Organizations for the Petroleum and Natural Gas Industry ANSI/NACE MR01 75 1 /ISO 15156 (all parts), Petroleum and natural gas industries—Materials for use in H 2 S- containing environments in oil and gas production ASME 2 Boiler and Pressure Vessel Code, Section V, Non-destructive examination ASME Boiler and Pressure Vessel Code, Section Vlll, Division 1 , Rules for construction of pressure vessels
3.2 compound Combination of constituent elements of the formulation of a nonmetallic material from a supplier. 3.3 control fluid redirection Feature, when activated, that provides control system communication. 3.4 design acceptance criteria Defined limits placed on characteristics of materials, products, or services established by the organization, customer, and/or applicable specifications to achieve conformity to the product design. 3.5 design margin Ratio of the material yield stress divided by the actual design stress in a given component. NOTE Design margins account for a level of reduced performance capability to compensate for uncertainties in the potential loading (applied stress) and the intrinsic variations in the mechanical properties, such as yield strength, ultimate strength, endurance strength, and modulus of elasticity, that have distribution about their mean values. 3.6 design validation Process of proving a design by testing to demonstrate conformity of the product to design requirements. 3.7 design verification Process of examining the result of a given design or development activity to determine conformity with specified requirements. 3.8 flow control device Installed interfacing accessory devices providing flow control unctionality through the lock mandrel. NOTE Examples include, but are not limited to, check valves, instrument hangers, equalizing devices, blanking plugs, and pump-through devices. 3.9 high-pressure, high-temperature equipment HPHT Equipment assigned a pressure rating greater than 1 03.4 MPa (1 5,000 psig) or a temperature rating greater than 1 76.7 °C (350 °F). 3.10 interface connection Connection on the lock mandrel connecting flow control or other equipment. 3.11 landing nipple Receptacle containing a profile designed for the installation o a lock mandrel.
3.12 lock mandrel Retention device used for a flow control device or other equipm nt. 3.13 model Lock mandrel or landing nipple equipment with unique components and operating characteristics that differentiate it from other lock mandrel or landing nipple equipment of the same type. 3.14 operating conditions Set of conditions to which the product is exposed during its operating life. 3.15 production/injection conduit Tubulars and equipment that provide the flow path between the reservoir and the christmas tree, including the riser for subsea applications. 3.16 profile Feature designed to receive the lock mandrel’s locking mechanism. 3.17 qualified person Individual with documented abilities gained through training or experience, or both, as measured against established requirements, such as standards or tests that enable the individual to perform a required function effectivel . 3.18 rated working pressure Landing nipple internal pressure design limit or lock mandrel differential pressure design limit from above and/or below, as established by the supplier/manufacturer.