Home>ASME standards>ASME 14414-2015 pdf download

ASME 14414-2015 pdf download

ASME 14414-2015 pdf download.Pump system energy assessment.
This International Standard sets the requirements for conducting and reporting the results of a pumping system energy assessment (hereafter referenced as “assessment”) that considers the entire pumping system, from energy inputs to the work performed as the result of these inputs. The objective of a pumping system energy assessment is to determine the current energy consumption of an existing system and identify ways to improve system efficiency. These requirements consist of — organizing and conducting an assessment, — analysing the data from the assessment, and — reporting and documenting assessment findings. This International Standard is designed to be applied, to open and closed loop pumping systems typically used at industrial, institutional, commercial, and municipal facilities, when requested. This International Standard is focused on assessing electrically-driven pumping systems, which are dominant in most facilities, but is applicable with other types of drivers, such as steam turbines and engines, and drives such as belt. The International Standard does not a) specify how to design a pumping system, b) give detailed qualifications and expertise required of the person using the International Standard although provides a list of body of knowledge in Annex C, c) address the training or certification of persons, d) specify how to implement the recommendations developed during the assessment, but does include requirements for an action plan, e) specify how to measure and validate the energy savings that result from implementing assessment recommendations, f) specify how to make measurements and how to calibrate test equipment used during the assessment, g) specify how to estimate the implementation cost or conduct financial analysis for recommendations developed during the assessment, h) specify specific steps required for safe operation of equipment during the assessment. The facility personnel in charge of normal operation of the equipment are responsible for ensuring that it is operated safely during the data collection phase of the assessment, i) address issues of intellectual property, security, confidentiality, and safety. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 17769-1, Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 1: Liquid pumps ISO 17769-2, Liquid pumps and installation — General terms, definitions, quantities, letter symbols and units — Part 2: Pumping system 3?Terms?and?definitions For the purposes of this document, the terms and definitions given in ISO 17769-1 and ISO 17769-2, and the following apply. 3.1 system energy demand minimum amount of energy which a pumping system in a specified process requires 3.2 components individual items of equipment within a system EXAMPLE Pump, motor, drive, valve, heat exchanger. 3.3 hydraulic?power water?horsepower power imparted to the liquid by the pump 3.4 electrical power input power required to support the pumping system operation 3.5 specific?energy energy consumed to move a certain volume of liquid through the system 3.6 parasitic power power imparted to the shaft of a pump and not used to move the fluid through the system 4?Identification?of?the?assessment?team,?authority?and?functions 4.1?Identification?of?assessment?team?functions The assessment team composed of knowledgeable personnel shall have members that are assigned responsibility and authority to carry out the following functions: — resource allocation, in order to: — allocate funding and resources necessary to plan and execute the assessment, — exercise final decision making authority on resources, — oversee the eventual participation of non-facility personnel including contracts, scheduling, confidentiality agreements, and statement of work. — coordination, logistics and communications, in order to: — obtain necessary support from facility personnel and other individuals and organizations during the assessment, — participate in organizing the assessment team and coordinate access to relevant personnel, systems, and equipment, — organize, schedule activities and manage the assessment. 4.2?Assessment?team?structure,?leadership?and?competency The assessment team should comprise of personnel from cross functional backgrounds. It shall include: — an assessor who has the pump system analysis competencies as described in Annex C; — the host organization representative who has overall responsibility and ownership for the assessment; — experts on the processes and the function of the system; — experts on the maintenance practises of the pumping system; — experts who can provide the team with cost data. The assessment team may be from the host organization or enhanced by using outsourced specialists particularly considering the competence of the assessor The host organization shall appoint the assessment team leader. This person may be a host facility employee or an external assessor. In small organisations, the team leader may be the competent assessor.

Related PowerPoint Templates

Template Categories
Popular Tags