ASME A112.18.2-2002 pdf download

ASME A112.18.2-2002 pdf download.Plumbing waste fittings.
2 Reference publications This Standard refers to the following publications, and where such reference is made, it shall be to the edition listed below, including all amendments published thereto. ASME (The American Society of Mechanical Engineers)/CSA Group ASME A112.18.1-2018/CSA B125.1-18 Plumbing supply fittings ASME A112.18.6-2017/CSA B125.6-17 Flexible water connections ASME (The American Society of Mechanical Engineers) B1.20.1-2013 Pipe Threads, General Purpose, Inch B16.23-2016 Cast Copper Alloy Solder Joint Drainage Fittings: DWV B16.29-2017 Wrought Copper and Wrought Copper Alloy Solder — Joint Drainage Fittings — DWV CSA Group B125.3-18 Plumbing fittings B1800-18 Thermoplastic nonpressure piping compendium CAN/CSA-B181.1-18 Acrylonitrile-butadiene-styrene (ABS) drain, waste, and vent pipe and pipe fittings CAN/CSA-B181.2-18 Polyvinylchloride (PVC) and chlorinated polyvinylchloride (CPVC) drain, waste, and vent pipe and pipe fittings B602-16 Mechanical couplings for drain, waste, and vent pipe and sewer pipe ASTM International (American Society for Testing and Materials) A48/A48M-03 (2016) Standard Specification for Gray Iron Castings A536-84 (2019) e1 Standard Specification for Ductile Iron Castings B16/B16M-10(2015) Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines B117-18 Standard Practice for Operating Salt Spray (Fog) Apparatus D1784-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds D2661-14e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings D2665-14 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings D3965-16 Standard Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings D4101-17e Standard Specification for Polypropylene Injection and Extrusion Materials D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods E29-13(2019) Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications F628-12e3 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core F891-16 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings TCNA (Tile Council of North America, Inc.) TCNA/ANSI A118.10-08 Standard Specification for Load Bearing, Bonded, Waterproof Membranes for Thin-set Ceramic Tile and Dimension Stone Installation 3 Definitions and abbreviations 3.1 Definitions The following definitions shall apply in this Standard: Bonding flange — an integrated edge or rim that projects from a shower drain for support and to allow attachment to the subsurface of the shower floor or a water proof membrane. See Figure 9.
Centre outlet — a lavatory waste fitting without an overflow opening. Continuous waste assembly — a drain assembly for multiple compartments of a fixture that is connected to a common trap. See Figures 7 and 8. Diversion tee — a fitting of a continuous waste assembly consisting of a tee fitting and an integral element that directs the flow downward to the outlet of the tee. See Figure 8. Grey water — untreated residential wastewater from bathtubs, showers, lavatories, clothes washers, and laundry tubs that has not come into contact with kitchen waste or waste from a sanitary unit. Note: Grey water does not include wastewater from kitchen sinks or dishwashers. Grey water diverter — a waste fitting that incorporates a mechanism that can be operated by a user to direct grey water for reuse or disposal. Linear shower drain — a receptacle containing a trench- or channel-shaped body and a solid cover or grate that is flush with the adjoining surface for receiving wastewater from a shower and conveying it to the drainage system. Overflow — a conduit that is integral or attached to a fixture and whose function is to remove liquid from a fixture after the fixture has been filled past the desired level. Patent overflow — a lavatory waste fitting incorporating an overflow opening. Sanitary unit — a water closet, urinal, bidet, or bedpan washer. Significant surface — an exposed surface that, if blemished, spoils the appearance or affects the performance of a fitting. Slip joint — an adjustable tubing connection that consists of a compression nut and compression washer and is designed to fit a threaded adapter fitting or a standard taper pipe thread. Standard tools — tools that are normally carried by plumbers for installing and maintaining plumbing. Note: Examples include screwdrivers, key wrenches, flat-jawed wrenches, and pliers. Strainer — a device designed to prevent debris from entering a drainage system. Strainer basket — a removable component of a sink strainer assembly, designed to collect debris. Strainer body — the fixed, exposed component of a sink strainer assembly connected to the fixture that accommodates the strainer basket. Strainer shell — the unexposed component of a sink strainer assembly that connects the strainer body to the fixture that accommodates the strainer basket.