ASME A112.6.3-2016 pdf download

ASME A112.6.3-2016 pdf download.Floor and Trench Drains.
1 GENERAL 1.1 Scope This Standard covers floor, area, adjustable floor, and trench drains that are used inside of, or outside and immediately adjacent to, building structures. This Standard specifies design requirements, definitions, nomenclature, outlet types and connections, grate-free areas, top-loading classifications, materials, and fin- ishes. Seam-welded, socket-type, stainless steel fabri- cated drains are covered in ASME A112.3.1. 1.2 Alternatives The requirements of this Standard are not intended to prevent the use of alternative designs, materials, or methods of construction, provided such alternatives meet the intent and requirements of this Standard. 1.3 Units of Measurement The values stated in either SI (metric) or U.S. Custom- ary (yard/pound) units of measure are equivalent in application; however, each system is to be used indepen- dently of the other. In this Standard, U.S. Customary units are shown in parentheses. Combining values from the two systems can result in nonconformance with the Standard. 1.4 Illustrations The illustrations included in this Standard are intended only to describe and portray typical drains and are not intended to restrict design or to specify requirements. 1.5 Reference Standards This Standard refers to the following publications, and where such reference is made, it shall be to the current edition of the publication, including all amend- ments published thereto: ASME A112.3.1, Stainless Steel Drainage Systems for Sanitary DWV, Storm, and Vacuum Applications, Above- and Below-Ground ASME A112.18.1/CSAB125.1, PlumbingSupplyFittings ASME B16.25, Buttwelding Ends Publisher: The American Society of Mechanical Engineers (ASME), Two Park Avenue, New York, NY 10016-5990 (www.asme.org) 1 ASTM A48, Standard Specification for Gray Iron Castings ASTM A74, Standard Specification for Cast Iron Soil Pipe and Fittings ASTM A307, Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength ASTM A536, Standard Specification for Ductile Iron Castings ASTM A563, Standard Specification for Carbon and Alloy Steel Nuts ASTM A888, Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications ASTM B584, Standard Specification for Copper Alloy Sand Castings for General Applications ASTM C564, Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings ASTM C1440, Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent(DWV), Sewer, Sanitaryand StormPlumbing Systems ASTM D1784, Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly (Vinyl Chloride) (CPVC) Compounds ASTM D2661, Standard Specification for Acrylonitrile- Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings ASTM D2665, Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings ASTM D3350, Standard Specification for Polyethylene Plastics Pipe and Fittings Materials ASTM D3965, Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene- Styrene (ABS) Materials for Pipe and Fittings ASTM D4101, Standard Specification for Polypropylene Injection and Extrusion Materials ASTM D4329, Standard Practice for Fluorescent Ultraviolet(UV) Lamp Apparatus Exposure ofPlastics ASTM G152, Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials ASTM G153, Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
2 GENERAL REQUIREMENTS 2.1 Materials 2.1.1 Castings. Castings shall be sound, free of blowholes, cold shuts, fins, and other imperfections, and shall be of uniform thickness and true to pattern. 2.1.2 Cast Iron. Castiron shall comply with Class 25 specified in ASTM A48. 2.1.3 Ductile Iron. Ductile iron shall comply with or exceed the requirements of Grade 60-40-18, 60-42-10, 60-45-12, or 80-55-06 specified in ASTM A536. 2.1.4 Stainless Steel. Stainless steel alloys shall be Type 304, 316, or 316L. 2.1.5 Bronze. Bronze shall comply with the require- ments for copper alloy No. C83600, C83800, or C84400 specified in ASTM B584. 2.1.6 Nickel-Bronze. Nickel-bronze shall comply with the requirements for copper alloys No. C97300, C97600, or C99700 specified in ASTM B584. 2.1.7 Acrylonitrile-Butadiene-Styrene. Acry- lonitrile-butadiene-styrene (ABS) shall comply with or exceed the properties of cell classification 32222 speci- fied in ASTM D3965. 2.1.8 Polyvinyl Chloride. Polyvinyl Chloride (PVC) shall complywithor exceed the properties ofcell classifi- cation 12454 or 14333 specified in ASTM D1784. 2.1.9 Polyethylene. Polyethylene (PE) shall comply with ASTM D3350. 2.1.10 Polypropylene. Polypropylene (PP) shall comply with ASTM D4101. 2.1.11 Bolting Materials. Materials used for studs, nuts, cap screws, and other steel fasteners shall comply with or exceed the requirements of Grade A steel speci- fied in ASTM A307 or ASTM A563. 2.2 Coatings Coatings shall complywiththe requirements specified in Clause 5.2 of ASME A112.18.1/CSA B125.1.